The NEOMIG welder is an inverter-based portable full-bridge welding machine combined with GMAW, FCAW, SMAW and DC LIFT TIG WELDING.Easy Stepless adjustment of voltage and wire feed brings quick setting of welding parameters giving excellent and professional welding results.
Processes: MIG/MAG(GMAW),TIG (GTAW), STICK (SMAW)
Input Power: 220V/1phase/50Hz/60Hz(110/220V can be customized)
Output Range: DC 15 -180 Amps
Input Current: 23.5A(220V)
Duty Cycle: AC 220V/180A@40%
1x MB15AK MIG TORCH with 3m cable
1x200A Electrode Holder with 2m cable
1x 300A Ground Clamp with 2m cable
1x Welding Mask
Inductance Regulation for MIG/MAG welding
- A. Adjust the welding softness for satisfying the user’s welding habit.
- B. Adjust the penetration, ensure the adhesion of the weld bead, realize the consistent penetration of the workpiece, and improve the welding quality of the
Quick ARC-START and Wave Control for MIG/MAG welding
Stabilized the small current transition, Reduce the splash of large current by 70% ~ 80%,The constant current arc starting improves the arc starting to 100%. Adopt analog circuit high-speed and accurate control technology, to achieve precise control of each droplet transfer and high-speed welding. High penetration rate and excellent weld bridging ability, realize the wide gap welding and high weld quality. Ultra-low heat input can control the formation of weld and minimize the deformation.
Poweful wire feeder driven by 45Watt electric motor, and it supplies high effeciency and stable feeding speed, up to 15m/min.
Quick Select Drive roll help you setup quickly by offering grooves for solid wire and flux-cored wire.
Smooth-start provides a smooth, spatter-free arc starting.
Thermal Overload Protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded.Automatically resets when it cools.
Uses 100 or 200mm spools for different demands.
*** NOTICE ***
Spoolgun is optional function that allows the simple connection of Spoolgun for the use of thin or softer wires that don’t have the column strength to feed through standard MIG
torches,such as aluminium wire.